Advantages Of Flexible Solar Cells - Advantages Of Flexible Solar Cells -

Advantages Of Flexible Solar Cells

flexable solar cell

There are two types of flexible solar cells that you can use to build your own solar panel system. You can get the cells pre-made or you can buy them already flexible. Which option is better? In my opinion, the cells pre-made are the way to go. They are more convenient, and if you have the right equipment, it can be a very cheap and fast way to get your hands on some of the most effective cells for your homemade solar power panel.

Semi-flexible Solar Cells

A sunset over a body of water

Flexible solar cells, sometimes called semi-flexible solar cells, are really flexible but not quite as flexible as rigid ones. These cells have small cells on both sides that are made to snap together when stuck between two pieces of plastic. They are not nearly as efficient as rigid cells, but they are more usable in the construction of solar panels.

The main difference between the two types of cells is how the cells are constructed. Rigid solar cells are made up of several sheets of glass, plastic or thin metal foils. This is the most efficient type of cell that you can find. When these cells are attached together, they are much more durable and can be used to make just about any type of panel that you can imagine. Because of their rigidity though, they are not available to the mass market.

Semi-flexible Cells Are Like Rigid Counterparts

Graphical user interface, text, application, chat or text message

Semi-flexible cells, on the other hand, are much like their rigid counterparts, only they are less rigid. These cells are made up of many smaller cells held together by a chemical compound. Each cell in this type of panel has its own chemical makeup so there is more of a chance that they will be able to stick together and make a good panel. This is a far cry from rigid solar cells.

If you were to look at the electrical output of flexible solar cells, they would compare favorably to their rigid counterparts. With semi-flexible cells, there is an increase in voltage because of the surface area that is exposed to the sun. There are also times when the cells will become too brittle and break off, but usually this is not an issue. It is usually easy to replace them if they are damaged.

The biggest benefit of the flexible cells is that they are more efficient at converting energy. This means that you can generate more electricity for the same amount of energy used with rigid cells. This also means that you can save a lot of money on your electric bill! Not only are you able to reduce your bill, but you can sell excess electricity back to the power company. This is a great way to earn an income from home that will pay itself back over a very long period of time.

Flexible Solar Cells Are More Durable

You will also find that flexible solar cells are more durable than their rigid counterparts. Since flexible solar cells are more malleable, they are less likely to be damaged in strong weather. Many of the rigid solar cells have seen the end of their life cycle because of the harsh weather conditions. However, solar cells that are made of plastic tend to be able to withstand the weather far longer than other solar cells.

Summing Up

If you are new to making your own solar panel, then it is probably best to go with flexible solar cells. They are easier to work with, and they cost less to purchase and install. Plus, you can easily find them at a wide variety of retailers. In just a short amount of time you can be enjoying your own home made energy source!

Subscribe to our monthly Newsletter